Information Modeling in SketchUp: An Overview (my 2016 #3DBasecamp presentation)

Information Modeling in SketchUp: An Overview (my 2016 #3DBasecamp presentation)

This page provides some additional information for my presentation at the 2016 3D Basecamp on.Monday, June 13th 4:30 pm - 5:45 pm in Sleeping Giant Description: Counter to popular belief, SketchUp can do much more than just “sketching”. This session dives deeper into the software, exploring techniques for creating parametric, data-loaded Dynamic Components, deploying the new  IFC (Industry Foundation Classes) functionality for BIM projects, and using scripting to bend the software to your will. With these information modeling tools, you can set up an efficient workflow for planning, estimating, and exchanging projects with software such as Revit, and more. More Documents:my_schema.xsd get_cost.rb ...
Read More
Second edition of “Architectural Design with SketchUp” is now available!

Second edition of “Architectural Design with SketchUp” is now available!

I am very excited to be announcing the release of the second edition of my book "Architectural Design with SketchUp" today!For this edition, I went back through the text and updated and improved a lot of content. As before, my main goal was to keep it relevant for as large a variety of SketchUp users as possible and at the same time provide thorough yet easy to follow examples and tutorials.I am also very excited to announce a completely new chapter on physically making things with SketchUp that includes 3D printing, CNC cutting, and other techniques. Lots of fun stuff!As before, this second edition will use the companion website at http://sketchupfordesign.com/the-book where you can find free sample chapters, videos, references, 3D models, and tutorials.There are also now over 30 videos that accompany the book and can be accessed using the instructions in the book.Interested in getting the book? Check out Amazon or Wiley.Here's the official press release:3D Modeling in SketchUp and Digital Making Come Together in Second Edition of “Architectural...
Read More
Second Edition of “Architectural Design with SketchUp” is almost here!

Second Edition of “Architectural Design with SketchUp” is almost here!

After the success of the first edition of my SketchUp book, I went back through the text for the second edition and updated quite a bit of content. My main goal was to keep it highly relevant for as large a variety of SketchUp users as possible and at the same time provide thorough yet easy to follow examples and tutorials. I am also very excited to announce a completely new chapter on physically making things with SketchUp that includes 3D printing, CNC cutting, and other techniques. Lots of fun stuff! As before, this edition will use the companion website at http://sketchupfordesign.com where you can find videos, references, 3D models, and tutorials.I'll post more about the book once it has been officially released. For now, here's a teaser: From the back cover: TAP INTO SKETCHUP'S REAL-WORLD, REAL-WORK FUNCTIONALITYArchitectural Design with SketchUp, Second Edition, is the leading guide to Trimble SketchUp, an easy-to-use, yet incredibly powerful tool for architects, interior designers, construction professionals, and makers. It provides the SketchUp...
Read More
Why Component-Based Modeling Makes Sense

Why Component-Based Modeling Makes Sense

As I describe in chapter 3 of my book, a component-based modeling workflow makes a lot of sense. It allows you to use a hierarchical model organization, work with attributes, dynamic components and - most recently - Industry Foundation Classes (IFC). I covered this approach at Trimble's SketchUp 3D Basecamp in Vail earlier this year. You can view the entire presentation as a video below:http://youtu.be/WWUyyP9v6hwIf you are interested in Dynamic Components, also watch Eric Schimelpfenig's presentation on "Dynamic Components, Greatest Hits, Vol. 1".P.S. This a similar presentation to what I gave at Trimble's Dimensions 2014 conference last week....
Read More
What’s New With SketchUp 2015

What’s New With SketchUp 2015

This is What's New... Depending on who you ask and how those people use SketchUp, it is quite likely that they will hone in on different favorite elements in the 2015 release of SketchUp, which came out just this week and parallel to Trimble's Dimensions user conference in Las Vegas (which I attended, hence the late post). High on many people's wishlist was 64 Bit support, so that is likely what will get mentioned most. Others will find the new IFC (Industry Foundation Classes) importer extremely useful. Here is my perspective on the new features:The performance improvements from 64 Bit support, face-finder improvements, and the "fast styles" labels are significant. Even with a thorough, component-based workflow (as I described in Chapter 3 and in my Basecamp presentation) especially large models could in the past bog SketchUp down quite a bit. Things should now get much smoother, especially on powerful machines. The now built-in IFC importer is a tremendous addition! This allows SketchUp to at least...
Read More